Mitsubishi Electric VL-50S2-E Operating Instructions Manual page 9

Reassembly and checking after
maintenance
opposite of the removal procedure.
Caution
- After maintenance, reattach parts securely.
-
(1) Mount the Lossnay Core.
2) Insert the Lossnay Core guide along the rail
of the main unit.
Rail
Lossnay Core
9.)
-
and mount it in the main unit. (Do not confuse
the top and bottom.)
Main unit catch
Outside air
(4) Close the panel.
-
unit.
Guide
(5) Turn on the circuit breaker or, for
the VL-50S
into the wall outlet.
(6) Turn the power on.
(7) After reassembly, check the
following.
-
-
-
shutter is open.)
Cleaning the panel/main unit
If the panel or main unit becomes dirty, wipe it
less), then wipe it with a clean cloth to remove
any traces of detergent.
Note
- Use of any of the following solvents in
maintenance may warp, weaken or discolor
Lossnay components.
-
chemical wipes, or abrasive-containing
detergents, such as cleansers
- Clean any dust off of the plug. (VL-50S
only)
Eng-9
Panel
-E, plug the power plug
2
Filter frame
-E
2