Mitsubishi Electric VL-50S2-E Operating Instructions Manual page 2

- Do not use the unit in excessively
hot areas (40°C or more), near
smoke, or where it could come in
contact with organic solvents.
- Fire could result.
- Do not disassemble the unit
in ways that require physical
Do NOT
alteration or tools.
disassemble
-
result.
- Do not let the unit get wet.
-
Do not expose
to water
- Do not insert or remove the power
plug with wet hands.
*1
No wet hands
-
- Use at the rated voltage.
-
You must
follow the
- Check that there is no dust on the
instructions
power plug
given.
-
short circuit.
- Insert the plug
the socket, making sure it is not
loose.
-
- Make sure that the outside air
intake opening is positioned so
that it will not take in combustion
gases or other exhaust.
-
could become depleted in the room.
- Always shut off circuit breakers or
remove the power plug
wall outlet during long periods of
disuse.
- Failure to do so could result in
- Install the outdoor weather covers
packaged with the unit.
- Rainwater entering the unit could
items getting wet.
- Immediately halt use in the event
of malfunction or breakdown.
- Continued use of the Lossnay could
or remove the power plug* 1 from the
wall outlet. Then contact the store of
.
*1
completely into
*1
from the
*1
purchase for inspection and repair.
<Examples of malfunction and
- Blades do not turn when power is
turned on.
-
vibrates while running.
- Blade rotation is slow or
irregular. (Motors require periodic
maintenance.)
- You smell burning.
- The unit mount is corroded or
damaged.
- Always shut off circuit breakers
or remove the power plug
the wall outlet before performing
maintenance work.
-
Caution
- Do not place combustion
equipment in the direct path of the
Prohibited
air from the unit.
- Incomplete combustion could result
in accidents.
- If using a step-ladder for
maintenance, be sure to place it
on level ground where there is
nothing underfoot.
-
- Never attach the unit to the ceiling.
-
- Because this product is designed
to be installed at a higher location,
install the product at least 1.8 m
- Failure to heed this warning may
- A fan rotates inside the unit during
operation. Never stick anything
Do NOT touch
inside the unit during operation.
-
- Do not use the unit in a bathroom
or other highly humid location.
You must
-
follow the
instructions
result.
given.
- Wear gloves when maintaining the
unit.
- Failure to wear gloves could result in
- After maintenance, reattach parts
securely.
-
Eng-2
from
*1