Advertisement
Available languages
Available languages
Fig,
A
Release canister clamps and remove motor head.
O
Push the foam filter on to the float valve retainer as far as it will go.
C 1
Remove the water tank.
D
Place the motor head on the canister and fasten the canister clamps.
E
Insert the suction hose into the opening of the canister and turn it to the right.
F
The two suction tubes can be connected by lightly pushing. The tube can be
connected by lightly pushing on the handle. ...
G
... then safe it.
H
The floor nozzle with ...
I
... units can be connected by lightly pushing on the tube ...
G
... then safe it.
K
The crevice nozzle permits the efficient cleaning of cracks, folds, recesses and
other awkward places.
L
The use of the upholstery nozzle is recommended for the cleaning of upholstery,
matresses, car seats etc..
P 1
Unwind the mains lead and install the plug into the power socket. Switch on the
appliance by pressing the switch to ON psosition.
After use
• Switch off the appliance by pressing the switch P 1 to OFF position.
• Empty an clean the canister.
Wet vacuum cleaning
17
Advertisement
