Advertisement
Available languages
Available languages
Fig,
A
Release canister clamps and remove motor head.
B
Push the textile filter on to the float valve retainer as far as it will go.
C 1
Remove the water tank and place the reinforcing collar of the paper filter on the
connecting piece in the canister and push on by turning it slightly.
D
Place the motor head on the canister and fasten the canister clamps.
E
Insert the suction hose into the opening of the canister and turn it to the right.
F
The two suction tubes can be connected by lightly pushing. The tube can be
connected by lightly pushing on the handle. ...
G
... then safe it.
H
The floor nozzle with ...
I
... units can be connected by lightly pushing on the tube ...
G
... then safe it.
K
The crevice nozzle permits the efficient cleaning of cracks, folds, recesses and
other awkward places.
L
The use of the upholstery nozzle is recommended for the cleaning of upholstery,
matresses, car seats etc..
P 1
Unwind the mains lead and install the plug into the power socket. Switch on the
appliance by pressing the switch to ON psosition.
R 1
An air intke control is located in the handle of the suction hose with which you can
reduce the suction power if e,g, the carpet or mat lifts from the floor under exces-
sive suction power:
max.
= Push control slide to the rear (aperture in handle closed)
min.
= Push control slide forward (aperture in handle open)
After use
• Switch off the appliance by pressing the switch P 1 to OFF psosition.
• Exchange of paper filter:
• Package paper filters (5 peaces)
16
Dry vacuum cleaning
reference 26 01 805
Advertisement
