Advertisement
Digitally regulated output maintains constant brightness
Battery level indication
Low voltage warning reminds when battery replacement is needed
Reverse polarity protection, to protect from improper battery insertion
Intelligent overheat protection to prevent high surface temperature
Made of durable aircraft-grade aluminum
Premium type Ⅲ hard-anodized anti-abrasive finish
Toughened ultra-clear glass lens with anti-reflective coating
Operation Instruction
Master switch: controls General mode and output selection
Auxiliary switch: controls Flash mode and output selection
ON/OFF
With the light off, long press the master switch for 0.5 seconds to activate the General mode,
long press the auxiliary switch for 0.5 seconds to activate the Flash mode.
With the light on, long press either switch for 0.5 seconds to turn off the light.
Mode Switching
In General mode, single click the auxiliary switch to activate Flash mode.
In Flash mode, single click the master switch to activate General mode.
Output Selection
In General mode, single click the master switch to cycle through Eco→Low→Med→High→Turbo.
In Flash mode, single click the auxiliary switch to cycle through Strobe→SOS.
Lock-out Function
Lock: Simultaneously press the two switches over 3 seconds (when the light is unlocked); the light
will flash on Low brightness level twice, indicating the light is locked.
Unlock: Simultaneously press the two switches for over 3 seconds (when the light is locked); the
flashlight will be unlocked and turned on the last used output level.
In locked status, a single press on either switch, the light will flash at Low brightness level twice
to remind it's locked.
Intelligent Memory Circuit
The flashlight memorizes the last brightness level used in the General mode. The next time it is
turned on, it will recall the previously used General brightness level.
Battery Level Indication
When the light is turned off, the battery level indicator around the switches will display the
Advertisement
