User Manual BDL3215E / BDL4225E
Power Indicator
LED Status
Power Status
LED active
Normal on
Standby
RC command
RC / DC power off
AC power switch off
Using Power Management
The LCD monitor follows the VESA approved DPM Power Management function.
The power management function is an energy saving function that automatically reduces the power consumption of the display when the
keyboard or the mouse has not been used for a certain period of time.
If the power management feature on the LCD monitor has been set to "ON" mode, this allows the system to enter a Power Saving Mode
when no signal is applied. This could potentially increase the life time and decrease the power consumption of the LCD monitor.
Display Signal of Video Source Setting to [VIDEO]
Use the input button on the front panel or the VIDEO SOURCE button on the remote control to set video source to [VIDEO].
Use the COLOR SYSTEM OSD menu to select [AUTO], [NTSC], [PAL], [SECAM], [PAL60], [4.43NTSC], according to your video format.
Picture Size
NORMAL:
Display with the input signal aspect ratio from PC signal, or display in 4:3 aspect ratio at COMPONENT or VIDEO signal.
FULL:
Display in the entire screen.
DYNAMIC:
CUSTOM (ZOOM): Images can be expanded beyond the active display area. The image which is outside of the active display area would
not be shown.
REAL:
LED behavior
Blue
Amber
Blue blinking
Black
Black
HDMI, VGA
DVI-D, VGA (BNC)
S-VIDEO, VIDEO
COMPONENT(BNC)
Signal Type
NORMAL SIZE
4:3
16:9
FULL
NORMAL
REAL
FULL
NORMAL
REAL
CUSTOM
Recommended Size
NORMAL
DYNAMIC
FULL
ZOOM
23
CUSTOM
DYNAMIC
ZOOM