Connecting To A Dvd Player - Philips BDL3215E User Manual

Connecting to a DVD Player

As you finish the connection between the DVD player and the LCD monitor, you could display the contents from the played DVD on the
LCD monitor. You might like to refer to your DVD player's manual for further information.
Connect the LCD Monitor to a DVD Player
To achieve this, apply component (YPbPr) cable to make connection between DVD player (Y, Cb/Pb, Cr/Pr Out) and LCD monitor
(COMPONENT/ YPbPr connector). If your DVD player supports HDMI signal, apply HDMI to HDMI cable for the connection.
The AUDIO IN 2, 3 (both of RCA connector type) can be used for audio input. Select [AUDIO 1] (for 3.5 phone jack), [AUDIO 2],
[AUDIO 3] or [HDMI] from the AUDIO SOURCE button on the remote control. HDMI (for audio) is selectable only when HDMI (for
video) is selected.
BDL3215E / BDL4225E
COMPONENT
(YPbPr)
COMPONENT
(YPbPr)
To DVD Component video output
HDMI connector
HDMI connector
20
User Manual BDL3215E / BDL4225E
To audio right output
DVD player
To HDMI output
RCA