Setup Procedure - Philips BDL3215E User Manual

Setup Procedure

1. Install the system on the right location
CAUTION:
THE LCD MONITOR MUST BE MOVED OR INSTALLED BY
TWO OR MORE PERSONS. (For 42" only)
Failure to follow this caution may result in injury if the LCD
monitor falls.
DO NOT ATTEMPT TO INSTALL THE LCD MONITOR BY
YOURSELF.
Contact your dealer for more information.
DO NOT MOUNT OR OPERATE THE DISPLAY UPSIDE
DOWN, FACE UP, OR FACE DOWN.
DO NOT INSTALL THE LCD MONITOR WHERE IT WILL BE
EXPOSED TO DIRECT SUNLIGHT.
Failure to follow this caution will result in display defects.
IMPORTANT:
Lay the protective sheet, which was wrapped around the LCD
monitor when it was packaged, beneath the LCD monitor so as
not to scratch the panel.
2. Install the remote control batteries
The remote control is powered by 1.5V AAA batteries. To
install or replace batteries:
1. Press and slide to open the cover.
2. Align the batteries according to the (+) and (–) indications
inside the case.
3. Replace the cover.
CAUTION:
Incorrect use of batteries can result in leaks or bursting. Be
careful especially about the following points.
Place "AAA" batteries matching the + and - signs on each
battery to the + and - signs of the battery compartment.
Do not combine new batteries with used ones. It causes
shorter battery life or leakage of batteries.
from leaking into the battery compartment. Don't touch
NOTE:
If you do not intend to use the Remote Control for a long period,
remove the batteries.
3. Connect to external equipment
before making connections.
Please refer to section "Connectivity" P.17~P.21 for operations.
4. Connect power cord
The power outlet socket should be installed as near to the
Fully insert the prongs into the power outlet socket. Loose
connection may cause noise.
NOTE:
Please refer to "SAFETY INSTRUCTIONS" section of this
manual for proper selection of AC power cord.
5. Turn on the power of the
attached external equipment
When connected with a computer, turn the computer power
6. Operate the attached external equipment
7. Adjust the sound
8. Adjust the screen
9. Adjust the image
10. Recommended Adjustment
To reduce the risk of "image persistence", please adjust the
following items based on the application being used:
"POWER SAVE", "PANEL SAVING", "DATE AND TIME",
"SCHEDULE".
14
User Manual BDL3215E / BDL4225E