User Manual BDL5231V/00
Power Indicator
Power ON
Power OFF
Power Standby when
"SCHEDULE" is enable
Power Standby
Diagnosis
(Detecting failure)
Using Power Management
The LCD monitor follows the VESA approved DPM Power Management function.
The power management function is an energy saving function that automatically reduces the power consumption of the display when the keyboard or
the mouse has not been used for a certain period.
The power management feature on the LCD monitor has been set to the "ON" mode. This allows the system to enter a Power Saving Mode when no
signal is applied. This could potentially increase the life and decrease the power consumption of the LCD monitor.
Display Signal of Video Source Setting to [VIDEO]
Use the input button on the front panel or the VIDEO SOURCE button on the remote control to set video source to [VIDEO].
Use the COLOR SYSTEM OSD menu to select [AUTO], [NTSC], [PAL], [SECAM], [PAL60], [4.43NTSC], according to your video format.
Picture Size
HDMI, DVI-D, PC-A
CVI ,
Signal Type
4:3
Squeeze
NORMAL: Display with the input signal aspect ratio from PC signal, or display in 4:3 aspect ratio at CVI or VIDEO signal.
FULL: Display in the entire screen.
DYNAMIC: Expand 4:3 pictures to the entire screen with non-linearity. (Some round image might be cut by expansion.)
CUSTOM (ZOOM): Images can be expanded beyond the active display area. The image which is outside of the active display area would not be
shown.
REAL: Image will be displayed for one by one pixel.
Status
Green
Red
Red On
Green Blinking
Red, Green
Red Blinking
* See troubleshooting
FULL
VIDEO
FULL
REAL
NORMAL SIZE
ZOOM
NORMAL
CUSTOM
REAL
NORMAL
DYNAMIC
CUSTOM
Recommended Size
NORMAL
DYNAMIC
FULL
ZOOM
24