Connecting To A Dvd Player - Philips BDL4635E User Manual

Connecting to a DVD Player

When you have finished connecting a DVD player to the LCD monitor, you can display the contents from the played DVD on the LCD monitor.
You might like to refer to your DVD player's manual for further information.
Connect the LCD Monitor to a DVD Player
• To achieve this, apply a 3x components cable (Y, Pb, Pr) with BNC connectors at one end and RCA connectors at the other end between DVD
player and display. In case you can only obtain RCA connectors on both ends you can use the in box available BNC-to-RCA converters.
• If your DVD player supports HDMI signaling, apply a HDMI to HDMI cable for the connection.
• The AUDIO IN 2 , 3 (both of RCA connector type) can be used for audio input. Select [AUDIO 1] ( for 3.5φ phone jack), [AUDIO 2], [AUDIO 3]
Or [HDMI] from the AUDIO SOURCE button on the remote control. HDMI (for audio) is selectable only when HDMI 1 or 2 (for video) is
selected.
BDL4653V
BDL4635E
21
User Manual BDL4635E