Table of Contents
Advertisement
Installation
5 Installation
NOTICE
The display must be initially set up by authorized medical IT staff or system integrator. All
devices and complete setup must be tested before taking into operation.
Unpacking
The display is shipped in a box and should reach you in perfect condition. Before opening the
package, check if
1. the box is undamaged and has not been opened unintentionally.
2. the packaging has not been exposed to environmental conditions outside of those specified
in the chapter "Technical specifications" on page 31.
In case of doubts, please contact Philips.
To prevent damage of the product, do not use a knife to open the box.
Installation procedure
Unlock height mechanism
Unlock the height mechanism to adjust the height of the display.
► Pull the red clip out of the fixation hole in the stand.
Fig. 4: Pull the clip
NOTICE
After unlocking the height mechanism, put the clip back in the fixation hole for future use.
14
Unpacking
PP27QHD Display MMPC-4227F1
Advertisement
Table of Contents
