Media Base Specifications - Dell Latitude XT3 Manual

Removing the Optical Drive
To remove the optical drive:
1 Remove the screw that secures the optical drive to the media base.
2 Use your screwdriver to slide the drive out of the media bay.
Installing the Optical Drive
To install the optical drive:
1 Insert the optical drive into the media bay on the media base.
2 Replace the securing screw that holds the optical drive in place.

Media Base Specifications

Physical
Height:
Without feet
With feet
Width
Depth
Weight
Ports and Connectors
USB
Docking
14.75 mm (0.58 inch)
16.25 mm (0.64 inch)
292.40 mm (11.51 inches)
191.50 mm (7.54 inches)
530 g (1.7 lbs)
two 4-pin USB-2.0 compliant connector
144-pin connector
Media Base
7