Advertisement
CLEANING AND MAINTENANCE
1. Disconnect the power cord plug from the electrical outlet
and make sure that your fan is not operating before
beginning any such service or cleaning operation.
2. During cleaning the product including any need for
disassembly (and reassembly) and any need not for the
use of additives. Clean the water tank every two or three
weeks, and clean the flume every week. Figure 12.
3. Take out the water tank when cleaning the fan, and pull
plastic tube out of the atomizing cup properly, then take
out the atomizing cup and clean them. Figure 13.
4. Use a dry cloth to absorb water remaining when cleaning
the atomizing cup, and dry it using a piece of soft cloth.
You may use mild detergent to clean the atomizing cup if
the water is dirty. Figure 14.
5. Please add a few drops of lubricant to the motor shaft after
cleaning to extend motor life every year. Figure 15.
6. Pack the unit properly and store it in a cool dry place if you
are not using it for a period of time.
7. After cleaning, all safety devices (including water tank panel,
grills and blades) must be reinstalled or remounted as
previously installed.
If you have any additional questions or problems with your Hunter Box Fan,
please call:
We open 24 hours a day, 7days a week. You may also reach us online at
www.HunterHomeComfort.com.
An electronic copy of this user manual can also be obtained online at
www.HunterHomeComfort.com.
61401-01 20150202
TECHNICAL SUPPORT
USA: 1-888-880-3267
8
Water tank
Figure 12
Figure 13
Water
overflow hole
Figure 14
Figure 15
Figure 12.
Advertisement
