Kenwood KDC-X701 Instruction Manual page 30

AUDIO SETTINGS
REAR HPF REAR-HPF FRQ
REAR-HPF SLOPE
REAR-HPF GAIN
SUBWOOFER SW LPF FRQ
LPF
SW LPF SLOPE
SW LPF PHASE
SW LPF GAIN
DTA SETTINGS
For settings, Digital Time Alignment settings.
CAR SETTINGS
• The following item is selectable only if [SUBWOOFER SET] is set to [ON] ( 25):
– [SUB-W LEVEL]
– [SUBWOOFER] of [SPEAKER SIZE]
– [SUBWOOFER LPF] of [X'OVER]
– [SUBWOOFER] of [DISTANCE] and [GAIN] in [DTA SETTINGS]
• The following item is selectable only if a setting other than [NONE] is selected for
[TWEETER], [REAR] and [SUBWOOFER] of [SPEAKER SIZE] ( 25):
– [TWEETER], [REAR HPF], [SUBWOOFER LPF] of [X'OVER]
26
ENGLISH
(Refer FRONT HPF settings, 25)
30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/
100HZ/120HZ/150HZ/180HZ/220HZ/
250HZ: Adjusts the crossover frequency for the
subwoofer (low pass filter). ; THROUGH: All
signals are sent to the subwoofer.
–6DB/–12DB/–18DB/–24DB: Adjusts the
crossover slope.
(Selectable only if a setting other than
[THROUGH] is selected for [SW LPF FRQ].)
REVERSE (180°)/NORMAL (0°): Selects
the phase of the subwoofer output to be in
line with the speaker output for optimum
performance.
–8 to 0: Adjusts the output volume of the
subwoofer.
Digital Time Alignment settings
Digital Time Alignment sets the delay time of the speaker output to create a
more suitable environment for your vehicle.
• For more information,
Determining the value for [DISTANCE] and [GAIN] of
[DTA SETTINGS]. ( 27)
DTA SETTINGS
POSITION Selects your listening position (reference point).
ALL: Not compensating ; FRONT RIGHT: Front right seat ;
FRONT LEFT: Front left seat ; FRONT ALL: Front seat
DISTANCE 0FT to 20.01FT: Fine adjust the distance to compensate. (Before making an
adjustment, select the speaker you want to adjust.)
GAIN –8DB to 0DB: Fine adjust the output volume of the selected speaker.
(Before making an adjustment, select the speaker you want to adjust.)
DTA RESET YES: Resets the settings ([DISTANCE] and [GAIN]) of the selected
[POSITION] to default. ; NO: Cancels.
CAR SETTINGS Identify your car type and rear speaker location in order to make the
adjustment for [DTA SETTINGS].
CAR TYPE COMPACT/FULL SIZE CAR/WAGON/MINIVAN/SUV/
MINIVAN(LONG): Selects the type of vehicle. ; OFF: Not compensating.
REAR-SP Selects the location of the rear speakers in your vehicle to calculate the
LOCATION furthest distance from the listening position selected (reference point).
• DOOR/REAR DECK: Selectable only when [CAR TYPE] is selected as
[OFF], [COMPACT], [FULL SIZE CAR], [WAGON] or [SUV].
• 2ND ROW/3RD ROW: Selectable only when [CAR TYPE] is selected as
[MINIVAN] or [MINIVAN(LONG)].
• Before making an adjustment for [DISTANCE] and [GAIN] of [DTA SETTINGS], select the speaker
you want to adjust:
FRONT LEFT/FRONT RIGHT/REAR LEFT/REAR RIGHT/SUBWOOFER:
You can only select [REAR LEFT], [REAR RIGHT] and [SUBWOOFER] if a setting other than
[NONE] is selected for [REAR] and [SUBWOOFER] of [SPEAKER SIZE]. ( 25)
• [REAR-SP LOCATION] of [CAR SETTINGS] is selectable only if a setting other than [NONE] is
selected for [REAR] of [SPEAKER SIZE]. ( 25)