Use Of Extension Cords - OCEANAIRE OWC series Engineering, Installation And Service Manual

USE OF EXTENSION CORDS

CAUTION:
FOR MODEL OWC1211 AND OWC1811 AN EXTENSION CORD CAN BE
USED PROVIDED IT IS RATED AT LEAST 15 AMPS @ 115 VOLTS WITH
GROUNDING-TYPE ATTACHMENT PLUG AND GROUNDING TYPE
CONNECTOR (LOAD FITTING)
FOR MODELS OWC2412 and OWC3612 AN EXTENSION CORD CAN BE
USED PROVIDED IT IS RATED AT LEAST 20 AMPS @ 250 VOLTS WITH
GROUNDING-TYPE ATTACHMENT PLUG AND GROUNDING TYPE
CONNECTOR (LOAD FITTING)
FOR MODEL OWC6012 AN EXTENSION CORD CAN BE USED PROVID-
ED IT IS RATED AT LEAST 30 AMPS @ 250 VOLTS WITH GROUNDING-
TYPE ATTACHMENT PLUG AND GROUNDING TYPE CONNECTOR
(LOAD FITTING)
FOR MODEL OWC3632 AN EXTENSION CORD MAY BEUSED PROVID-
ED IT IS RATED AT LEAST 20 AMPS @ 250 VOLTS, 3 PHASE
FOR MODELS OWC6032 AN EXTENSION CORD MAY BEUSED PRO-
VIDED IT IS RATED AT LEAST 30 AMPS @ 250 VOLTS, 3 PHASE
FOR MODELS OWC3634 AND OWC6034 AN EXTENSION CORD CAN
BE USED PROVIDED IT IS RATED AT LEAST 20 AMPS @ 600 VOLTS, 3
PHASE
SPECIAL NOTICE—THREE PHASE OPERATION
Models OWC3632, OWC3634, OWC6032 and OWC6034
All three-phase AQUACOOLER models are equipped with a three-
phase monitor for added compressor protection. The phase monitor,
located in the control box, has multi-color LED that reports status.
The monitor protects the compressor from reverse operation, phase
loss and low voltage situations. Further description of the three-
phase monitor is located in the electrical section of the manual.
NOTICE - DO NOT OPERATE ANY THREE-PHASE UNIT BY BY-
PASSING THE MONITOR, THIS WILL VOID THE WARRANTY
6