OCEANAIRE OWC series Engineering, Installation And Service Manual page 14

ACCESSORIES
Hose Kit, HK
Hose kits are available in lengths of 10, 25, and 40 feet. Each hose kit allows for conven-
ient installation of the AQUACOOLER, while allowing for portability within the allowable
space.
NOTICE—When using these hoses in applications with water pressures exceeding
50 PSIG, a water pressure reducing valve must be installed in the water supply line
prior to the hose kit; otherwise warranty on the hose kits will be void.
All hose kits have FEMALE flare connectors to match the MALE flare fittings on the units
(see chart below). The WATER IN connector consists of a 3/4" hose barb. WATER OUT
and DRAIN (condensate) have no fitting, and can be fed to a sink or permanent drain.
When using a hose kit, avoid sharp corners, hot water pipes and kinking to assure proper
water flow of the supply and return lines.
Included with the hose kit is a sink/faucet adapter
Hose Kit Length
HK-1 10 ft
HK-2 25 ft
HK-5 40 ft
HK-3 10 ft
HK-4 25 ft
HK-6 40 ft
Flare Conn
OWC12 OWC18 OWC24 OWC36 OWC60
IN-OUT-DRAIN
ü
3/8 3/8 3/8
ü
3/8 3/8 3/8
ü
3/8 3/8 3/8
5/8 5/8 3/8
5/8 5/8 3/8
5/8 5/8 3/8
Hose Kit
12
ü ü
ü ü
ü ü
ü
ü
ü
ü
ü
ü