Electronic Controller - OCEANAIRE OWC series Engineering, Installation And Service Manual

Deluxe Electronic Controller
The AQUACOOLER controller is equipped with many features for a more precise level of
cooling and operation. Additionally, the controller can be removed from the unit and in-
stalled for remote operation when using an extended display cable. Also, with the
addition of a remote sensor, the controller can operate from the unit while sensing
temperatures in another space or in ductwork — accessory parts may be required.
OCEANAIRE DELUXE ELECTRONIC CONTROLLER DISPLAY
When power is connected, the controller will display "888" momentarily, and will then go
blank. Press the POWER button, then press the TEMP SELECT button until the SET
POINT is displayed. Adjust the SET POINT to the desired temperature, and the unit will
heat/cool as required.
The systems controls temperature within +/- 2°
POWER—Turns the unit on/off when power is supplied
MODE - Selects the mode of operation between Cool and Moisture Control.
COOL - The system will operate in cooling mode, only.
MOISTURE CONTROL - The system operates in the cooling mode to reduce humidity
within the conditioned space.
Every 4 hours, the fan is started, circulating the air, and the air temperature is recorded by
the controller. The cooling cycle is started for one hour, or until the room temperature
drops 2°, which ever comes first. This cycle repeats every four hours.
15