Operating Instructions - Bella 14411 Instruction Manual

8. Turn the temperature control knob on probe to
OFF position. The reversible grill/griddle is on
when dial is turned to warm and the indicator
light is on.
9. Insert the temperature control probe securely
into the Reversible Grill Griddle's control probe
socket, located under the handle opposite the
grease drains.
NOTE: The temperature control probe is
not submersible.
CAUTION: Use the temperature control probe
supplied with this Reversible Grill Griddle only.
The use of any other temperature control probe
may cause fire, electric shock, or injury.
10. The Reversible Grill Griddle is now ready for use.
WARNING: Improper assembly of the Reversible
Grill Griddle and the base could result in personal
injury and possible damage to property. Make
sure both of the handle notches are properly
inserted and fit securely in place over the base tabs
before inserting the temperature control probe.

Operating Instructions

1. Make sure the drip tray is level and secure before adding the double-sided cooking plate.
2. Grasping the large cool-touch handles, flip the Reversible Grill Griddle with the desired cooking plate
on top.
3. Note the two notches in each of the handles. When assembling the Reversible Grill Griddle plate,
these notches will fit and lock over the two tabs in the base. (See Figure on p. 8.)
4. Turn temperature control dial to the OFF position. The reversible grill/ griddle is on when dial is turned to
warm and the indicator light is on.
5. Insert the temperature control probe securely into the Reversible Grill Griddle's control probe socket.
l
6. Plug cord into any standard 120V AC wall outlet.
IMPORTANT: Always plug cord into grill griddle first, then into wall outlet.
7. Preheat the Reversible Grill Griddle for approximately 5 minutes before cooking. To preheat, turn the
temperature control to desired temperature. The power ON indicator light on the temperature control
probe will illuminate as soon as the dial is rotated. The light will go out once the selected temperature has
been reached.
8. Add food to the cooking plate. Rotate the temperature control dial and cook according to the recipe.
NOTE: During cooking, the power ON indicator light will go on and off indicating that the Reversible Grill
Griddle is maintaining proper temperature.
CAUTION: Both grill and griddle surfaces are extremely hot during use. Always wear protective oven mitts
to prevent burns and/or personal injury.
CAUTION: DO NOT USE COOKING SPRAYS. THEY CAN CAUSE A BUILD-UP ON THE COOKING PLATES
AND MAY AFFECT THE NON-STICK PERFORMANCE OF THE PRODUCT.
9. When cooking bacon or foods containing lots of grease:
• While cooking, it may be necessary to use a heat-proof plastic spatula or wooden spoon to guide grease
and drippings from the food to the drain holes in the cooking plate.
• Wearing protective oven mitts, grasp the cool-touch handles and lift the Reversible Grill Griddle plate up
and away from the drip tray. Check the drip tray to make sure it is not full.
• If it is less than ¾ full, then replace the cooking plate and continue cooking.
• If the drip tray is more than ¾ filled, discontinue cooking and allow adequate time for the drip tray to cool
down completely.
n
• When drip tray contents has cooled, remove drip tray; empty contents and rinse in hot water.
See Notes on the Proper Disposal of Grease and Oil and Care & Cleaning Instructions for
detailed instructions.
CAUTION: Do not leave appliance unattended during use!
CAUTION: The Reversible Grill Griddle plate is hot and retains heat for some time. It is not recommended
that the unit be lifted or the plate be reversed during cooking. Allow the unit and the plate to cool
completely before moving or using the reverse side of the cooking plates.
So-312128_14411 Bella 2in1 grill-griddle2.indd 6
6
Figure 2
2015-03-24 5:08 PM