ABB ACS850-04 Hardware Manual page 87

Note: The input and output power cables must fit inside the area marked with
diagonal lines in the image below to avoid chafing of the cables when the drive
module is inserted into the cabinet.
A
B
D
View without cabinet side plate in place. A) 360-degree grounding at the lead-through plate for the input power cables; B)
Grounding busbar of the input power cabling panel; C) 360-degree grounding at the lead-through plate for the output
power cables; D) Grounding busbar of the output power cabling panel; E) Allowed space for power cables
U1, V1, W1
U2, V2, W2
C
A
C
E
102 mm (4 in.)
E
87
Installation