Specification - Sportsman GEN1000i Instruction Manual

1. Remove the spark plug, pour in about one tablespoon of SAE 10W30 motor oil
into the spark plug hole and reinstall the spark plug.
2. Use the recoil starter to turn the engine over several times (with ignition off).
3. Pull the recoil starter until you feel compression.
4. Stop pulling.
5. Clean exterior of the generator and apply a rust inhibitor.
6. Store the generator in a dry, well-ventilated place, with the cover place over it.
7. The generator must remain in a vertical position.

SPECIFICATION

MODEL
Type
AC Voltage
Max. Output
Rated Output
Power Factor
DC Output
Model
Type
Bore×Stroke mm×mm
60Hz
Air-cooled, 4 cycle, OHV, Gasoline Engine
19
GEN1000i
Invertor Generator
120V
1.00 kVA
0.80 kVA
1.0
12V / 4.0A
XY139F-6
39×33.5