Using Electric Power; Ac Application; Dc Application - Sportsman GEN1000i Instruction Manual

7. Turn the choke lever back to RUN position then plug in appliances.

USING ELECTRIC POWER

AC APPLICATION

(a) Turn off the switch(es) of the electrical appliance(s) before connecting to the
generator.
(b) Insert the plug(s) of the electrical appliance(s) into the receptacle.
l Be sure the electric apparatus is turned off before plugging in.
Be sure the total load is within generator rated output.
l
Be sure the socket load current is within socket rated current.
l
The economy control switch must be turned to "OFF" when using electric
l
devices that require a large starting current, such as a compressor or a
submergible pump.

DC APPLICATION

This usage is applicable to 12V battery charging.
Be sure the economy control switch is turned off while charging the battery.
STOPPING T HE E NGINE
1. Turn off the power switch of the electric apparatus or disconnect any
electric devices.
2. Turn the engine switch to "STOP" position.
3. Turn the fuel cock lever to "OFF".
Turn the fuel tank cap air vent knob counterclockwise to the "CLOSED"
position
13
CLOSE