Washable Air Filter; Cleaning And Adjusting Spark Plug - Sportsman GEN1000i Instruction Manual

1,000 max watts inverter generator
Table of Contents

Advertisement

l
Engine Oil SAE 10W30 Capacity: 10 oz.
l
Be sure no foreign material enters the crankcase.
l
Do not tilt the generator when adding engine oil. This could result in overfilling
and damage to the engine
l
Clean the oil filter every other 100 hr.

WASHABLE AIR FILTER

Maintaining an air cleaner in proper condition is very
important. Dirt induced through improperly installed,
improperly serviced, or inadequate elements damages
and wears out engines. Keep the element always
clean.
1. Remove the cover.
2. Remove the air filter cover and element.
3. Wash the element in solvent and dry.
4. Oil the element and squeeze out excess oil. The
element should be wet but not dripping.
5. Insert the element into the air filter.
6. Install the cover.
The engine should never run without the Filter; excessive piston and/or cylinder
wear may result.

CLEANING AND ADJUSTING SPARK PLUG

1. Remove the cover.
2. Check for discoloration and remove the carbon.
3. Check the spark plug type and gap.
Standard Spark Plug:
Spark Plug Gap: 0.6-0.7 mm (0.024-0.028 in)
4. Install the spark plug.
5. Install the cover
CMR6A
 
 
16
 

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents