Using Wedj; About Wedj; Connections - Pioneer DDJ-WEGO4 Operating Instructions Manual

Using WeDJ

About WeDJ

! WeDJ is software that enables DJ performances with an iPad.
! WeDJ can be purchased from the App Store.
The system requirements for combining this unit and WeDJ are as
follows.
For the latest system requirements for WeDJ, check the App Store.
iOS
Compatible models
! For information on the latest system requirements, compatibility,
and supported operating systems, see [DDJ-WeGO4] of the [DJ
CONTROLLER] category from the [SOFTWARE INFORMATION]
page of the Pioneer DJ support site below.
http://www.pioneerdj.com/en/support/software-information/
! There is no guarantee that operation will be possible on all iPads
meeting the above system requirements.
! Depending on the power-saving settings and other conditions of the
iPad, performance may be insufficient.
! Problems may occur with operation depending on the other software
that you use.
! An Internet connection is required to access App Store.

Connections

1 Connect speakers with a built-in amplifier, a power
amplifier, etc. to the [MASTER] output terminals of this
unit.
! An audio cable (RCA) is not included with this product. Please pro-
vide it yourself separately.
R L
Speakers with built-in amplifier,
power amplifier, etc.
! For details on connecting the input/output terminals, see page 7 .
! Set the volume of the device connected to the [MASTER] terminals
(speakers with built-in amplifier, power amplifier, etc.) to an appropri-
ate level. Note that the output sound may be loud if the volume is set
too high.
2 Connect headphones to an [PHONES] output terminal
of this unit.
! Connect stereo headphones with an impedance of 32 W or higher.
Headphones with an impedance less than 32 W and mono head-
phones are not supported.
! Do not connect headphones simultaneously to the stereo phone jack
and the stereo mini-phone jack.
8
En
WeDJ
iOS 9, 8
iPad Pro (9.7-inch), iPad Air 2, iPad Air, iPad
mini 4, iPad mini 3, iPad mini 2
Headphones cord
To headphones
For checking
the output sound
Headphones
3 Connect this unit and the iPad using the cable
included with the iPad.
! Be sure to connect directly using the cable included with the iPad. A
USB hub cannot be used.
Cable included with iPad
iPad Pro (9.7-inch),
iPad Air 2, iPad Air,
iPad mini 4, iPad mini 3,
iPad mini 2
4 Connect the included DC plug of the AC adapter to
this unit and then connect the power cord.
! Connect the power cord after all the connections between devices
have been completed.
! Be sure to use the power cord and AC adapter included with this
product.