Pioneer DDJ-WEGO4 Operating Instructions Manual page 21

3 Read the terms of the license agreement carefully,
and if you agree, click [Agree].
! If you do not agree to the contents of the license agreement, click
[Disagree] to quit installation.
4 If the installation completion screen appears, click
[Close] to close the rekordbox installer.
0 Installation Procedure (Windows)
! Log on as the user which was set as the computer's administrator
before installing.
1 Unzip the downloaded rekordbox software file.
2 Double-click the unzipped software file to launch the
installer.
3 Read the terms of the license agreement carefully,
and if you agree, select [Agree], then click [Next].
! If you do not agree to the contents of the license agreement, click
[Cancel] to quit installation.
! After the installation destination is specified, the installation starts.
The message of successful installation appears once installation is
completed.
4 Click [Finish] to quit the rekordbox installer.
The installation is now complete.
Connections
1 Connect speakers with a built-in amplifier, a power
amplifier, etc. to the [MASTER] output terminals of this
unit.
! An audio cable (RCA) is not included with this product. Please pro-
vide it yourself separately.
R L
Speakers with built-in amplifier,
power amplifier, etc.
! For details on connecting the input/output terminals, see page 7 .
! Set the volume of the device connected to the [MASTER] terminals
(speakers with built-in amplifier, power amplifier, etc.) to an appropri-
ate level. Note that the output sound may be loud if the volume is set
too high.
2 Connect headphones to an [PHONES] output terminal
of this unit.
! Connect stereo headphones with an impedance of 32 W or higher.
Headphones with an impedance less than 32 W and mono head-
phones are not supported.
! Do not connect headphones simultaneously to the stereo phone jack
and the stereo mini-phone jack.
21
En