Pioneer DDJ-WEGO4 Operating Instructions Manual page 26

0 Setting and calling out an auto beat loop
1 When the [HOT CUE] indicator is off, press the
[HOT CUE/SAMPLER] mode switching button.
The unit switches to the hot cue mode and the indicator lights.
2 Press the loop half button or loop double button to
set the length of the auto beat loop.
3 Press the loop button during playback.
The auto beat loop starts.
4 Press a performance button during auto beat loop
playback to set the loop.
5 Press the performance button with the loop set.
Loop playback starts from the loop in point of the set loop.
! A set loop can be cleared by pressing a performance button while
pressing the [SHIFT] button.
0 Setting and calling out a manual loop
1 When the [HOT CUE] indicator is off, press the
[HOT CUE/SAMPLER] mode switching button.
The unit switches to the hot cue mode and the indicator lights.
2 Press the loop half button while pressing the [SHIFT]
button during playback and then press the loop button.
Loop playback starts.
3 Press a performance button during loop playback to
set the loop.
4 Press the performance button with the loop set.
Loop playback starts from the loop in point of the set loop.
! A set loop can be cleared by pressing a performance button while
pressing the [SHIFT] button.
Using the sampler function
The tracks loaded in the sampler slots of the sampler can be played with
the performance buttons.
0 Preparing to use the sampler
In the upper part of the rekordbox dj screen, click the
[SAMPLER] button to display the sampler panel and click
the [MIXER/MIC] button to display the mixer panel.
0 Loading a track into a sampler slot
1 When the [SAMPLER] indicator is off, press the
[HOT CUE/SAMPLER] mode switching button.
The unit switches to the sampler mode and the indicator lights.
2 Press the rotary selector to move the cursor to the
track list.
3 Turn the rotary selector.
Select the track you wish to load in a sampler slot.
4 Drag and drop the track you wish to load to an empty
slot of the sampler panel in rekordbox dj.
The selected track is loaded into the sample slot.
26
En
0 Using the performance buttons to play the
sampler
1 When the [SAMPLER] indicator is off, press the
[HOT CUE/SAMPLER] mode switching button.
The unit switches to the sampler mode and the indicator lights.
2 Click the [SamplerBank] button in the sampler panel
screen of rekordbox dj.
The sampler bank is switched. The sampler has four banks and each
bank has sixteen slots.
3 Move the [SAMPLER VOL] fader in rekordbox dj
upward.
4 Press a performance button.
The sound of the slot assigned to the button that was pressed is played.
! The first sampler bank is assigned to the respective button.
Deck 1 (left deck) Deck 2 (right deck)
[1] Slot 1 Slot 9
[2] Slot 2 Slot 10
[3] Slot 3 Slot 11
[4] Slot 4 Slot 12
5 Press a performance button while pressing the [SHIFT]
button.
Playback of the sound of the slot assigned to the button that was
pressed is stopped.
Using the pad FX
A wide range of effect performances are possible with just the simple
operation of pressing and releasing buttons.
1 Press and hold down the [FX] button or press and
hold down the [FX] button while pressing the [SHIFT]
button.
The effect turns on according to the effect assigned to the button and
number of beats settings that was pressed.
Without [SHIFT]
[FX 1] Effect A (Pad FX mode 1)
[FX 2] Effect B (Pad FX mode 1)
[FX 3] Release FX A (Pad FX mode 1)
! The effects assigned to the [FX] buttons can be customized.
(Customize the effects while this unit is in a connected state.)
! For the detailed operating procedures, see the Operating
Instructions of rekordbox.
2 Release your finger from the [FX] button.
The effect turns off.
With [SHIFT]
Effect C (Pad FX mode 2)
Effect D (Pad FX mode 2)
Release FX B (Pad FX mode 2)