Advertisement
Cleaning
Blowing dust, polishing bonnet lint, and grit out of the
motor housing using compressed air is a necessary regular
maintenance procedure. Dust and grit containing metal
particles often accumulate on interior surfaces could create
an electrical shock hazard if not frequently cleaned out.
WARNING: Never use solvents or
other harsh chemicals for cleaning the
non-metallic parts of the tool. These
chemicals may weaken the plastic
materials used in these parts. Use a cloth
dampened only with water and mild soap.
Never let any liquid get inside the tool;
never immerse any part of the tool into
a liquid.
Lubrication
D
WALT tools are properly lubricated at the factory and are
E
ready for use. Tools should be relubricated regularly every
sixty days to six months, depending on usage. (Tools used
constantly on production or heavy-duty jobs and tools
exposed to heat may require more frequent lubrication.)
This lubrication should only be attempted by trained power
tool repairpersons such as those at D
centers or other authorized service locations.
Motor Brushes
Be sure tool is unplugged before inspecting brushes.
Carbon brushes should be regularly inspected for wear.
To inspect brushes, unscrew the plastic brush inspection
caps (located in the sides of the motor housing) and the
spring and brush assemblies may be withdrawn from the
tool. Keep brushes clean and sliding freely in their guides.
Carbon brushes have varying symbols stamped into them,
and if the brush is worn down to the line closest to the
spring, they must be replaced.
Accessories
Warning: Since accessories, other than
those offered by D
been tested with this product, use of
such accessories with this tool could be
hazardous. To reduce the risk of injury,
only D
WALT recommended accessories
E
should be used with this product.
Use only accessories having a maximum operating speed
at least as high as the highest "NO LOAD RPM" marked
on the tool's nameplate. This precaution applies to any
accessory on any tool.
Protecting the environment
Separate collection. This product must
not be disposed of with normal household
waste.
Should you find one day that your D
replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
7
WALT service
E
WALT, have not
E
WALT product needs
E
Separate collection of used products and
packaging allows materials to be recycled
and used again. Re-use of recycled materials
helps prevent environmental pollution and
reduces the demand for raw materials.
Service Information
D
WALT offers a full network of company-owned and
E
authorized service locations throughout Asia. All D
Service Centers are staffed with trained personnel to
provide customers with efficient and reliable power tool
service. Wether you need technical advice, repair, or
genuine factory replacement parts, contact the D
location nearest to you.
Notes
-
D
WALT's policy is one of continuous improvement
E
to our products and, as such, we reserve the right to
change product specifications without prior notice.
-
Standard equipment and accessories may vary by
country.
-
Product specifications may differ by country.
-
Complete product range may not be available in all
countries. Contact your local D
availability.
E N G L I S H
WALT
E
WALT
E
WALT dealers for range
E
N028856
Advertisement
