Programmed Brewing; Brewed Coffee - Cuisinart DGB900BCU Grind & Brew Plus Instruction Manual

Programmed Brewing

 To set the appliance to start at a programmed time, refer to "Set Programme Time"
section C.
 Turn the 'Cup Quantity' knob to set the number of cups you want to brew, this will
grind enough coffee beans to suit your requirement.
 Press the 'Strength Control' button to set the strength (MILD, MED, or STRONG) this
will show on the LCD display.
 Press the 'Grind Off' button if you are intending to use pre-ground coffee beans.
 The Grind & Brew Plus will begin brewing at the programmed time

Brewed Coffee

 When the brewing cycle has completed, 5 beeps will sound. Coffee will continue to
stream from the filter for several seconds afterwards.
 When the coffee is ready, stir before serving, to blend the flavours. The coffee at the
bottom of the carafe will be stronger than that at the top.
 The brew-through, pour-through lid allows coffee to drip from the appliance through
the closed lid. When brewing is complete, the lid seals itself so air stays out and coffee
freshness and temperature are maintained. No need to turn or adjust the lid before
pouring.
 After brewing, the appliance will automatically shut off. The thermal carafe will keep
the coffee hot for hours.
 The 'Automatic Brew Pause' feature allows you to remove the carafe during mid-brew.
The brewing process does not stop during this period, only the flow of coffee from the
basket to the carafe stops.
N.B. Whilst we offer this feature for your convenience, we do not recommend that you
pour coffee before the cycle has reached completion, since the coffee brewed at the
beginning of the cycle has a very different flavour profile to that made at the end of the
cycle. Removing a cup during the cycle will alter the flavour of the finished pot.
CAUTION: The bottom of the thermal carafe is hot to touch for several minutes after
brewing.
WARNING! Do not remove the carafe for longer than 20 seconds or the coffee may
overflow the basket.
15