D Inserting The Charcoal Water Filter - Cuisinart DGB900BCU Grind & Brew Plus Instruction Manual

Hide thumbs Also See for DGB900BCU Grind & Brew Plus:
Table of Contents

Advertisement

D
Inserting the Charcoal water filter
Your appliance comes with two charcoal water filters that eliminate chlorine, bad tastes
and odours from tap water. It is recommended that you change your water filter every 90
days or after 90 uses and more often if you have hard water. Replacement filters can be
purchased directly from the manufacturer, (see "UK After Sales Service" section).
 Remove the filter from its packaging and soak in cold tap water for 15 minutes.
1
2
 To remove the water filter holder, simply lift it out from its opening on the inner wall
of the reservoir. This can be accessed by lifting the water reservoir lid.
 Hold stem in one hand. With your other hand, gently press the compartment door
down and pull outwards to flip open.
 Place the filter in the holder and close the compartment cover; you will hear a snap
indicating filter is in place.
3
4a 4b 4c
1. Water Reservoir Cover
2. Water Filter Holder
3. Burr Grinder
4. Coffee Channel Assembly
a. Channel Cover (must be in
place before grinding)
b. Coffee Chute
c. Grind Chute Lever
5. Filter basket door release button
5
Water Filter
Holder
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents