Sound And Illumination Effects; Using A Microphone; Clock And Timers - Panasonic SC-MAX8700 Owner's Manual

Sound and illumination effects

Sound effects
Preset EQ
1
Press [EQ] (main unit: [LOCAL EQ]) to select
"PRESET EQ".
2
Press [R, T] to select the desired preset EQ
setting and then press [OK].
Or turn [MULTI CONTROL] to select the desired
preset EQ setting.
Manual EQ
1
Press [EQ] (main unit: [LOCAL EQ]) to select
"MANUAL EQ".
2
Press [R, T] to select the sound effect.
Or turn [MULTI CONTROL] to select the sound effect.
3
Press [Y, U] to select the setting and then press
[OK].
Or press [2/3] or [5/6] to select the
setting.
BASS/MID/TREBLE –4 to +4
SURROUND "ON SURROUND" or
"OFF SURROUND"
D.Bass
1
Press [D.BASS] to select "D.BASS LEVEL" or
"D.BASS BEAT".
To cancel, select "OFF D.BASS".
2
Press [R, T] to select the setting and then press
[OK].
Or turn [MULTI CONTROL] to select the setting.
Note:
D.BASS BEAT: This function emphasizes the attack level of
the drum beat and produces a punchy sound. Depending on
the track, the effect may be small.
Illumination effects
You can change the illumination effect on the system.
Press [ILLUMINATION] to select the desired effect.
PATTERN Illuminate with pattern in multiple colors.
COLOR A selection of 60 different illumination
colors on the speakers and 6 different
illumination colors on the main unit.
OFF Cancel the effect.
You can also press [R, T] to select the next or previous
effect and then press [OK].
Or turn [MULTI CONTROL] to select the effect.

Using a microphone

Preparation
Decrease the volume of the system to its minimum before
you connect or disconnect a microphone.
1
Connect a microphone (not supplied) to the
microphone jack.
Plug type: Ø 6.3 mm ( 1
2
Turn [MIC VOL, MIN/MAX] on the main unit to
adjust the volume of the microphone.
If you want to sing with the background music.
3
Play the music source and adjust the volume of
the system.
Note:
•
If a strange noise (howling) is emitted, move the
microphone away from the speakers, or decrease the
volume of the microphone.
•
When you do not use the microphone, disconnect it from
the microphone jack, and decrease the volume of the
microphone level to "MIN".

Clock and timers

Setting the clock
This is a 12-hour clock.
1
Press [SETUP] to select "CLOCK".
2
Press [Y, U] to set the time and then press [OK].
To check the time
Press [SETUP] to select "CLOCK" and then press [OK].
In standby mode, press [DISPLAY].
Note:
Reset the clock regularly to maintain accuracy.
Sleep timer
The sleep timer turns off the system after the set time.
Press [SLEEP] to select the setting (in minutes).
To cancel, select "OFF".
To check the remaining time
Press [SLEEP].
Note:
• The remaining time is shown for a few seconds every
minute. "SLEEP 1" is always shown when only 1 minute
remains.
• The play timer and sleep timer can be used together.
• The sleep timer always comes first. Be sure not to set an
overlap of timers.
/ ") monaural
4
15
15