Sound And Illumination Effects; Using A Microphone - Panasonic SCMAX650 Owner's Manual

Sound and illumination
effects
Sound effects
1
Press [SOUND] to select the sound effect.
2
Press [Y, U] to select the desired setting.
BASS –4 to +4
MID
TREBLE
SURROUND "ON SURROUND" or
"OFF SURROUND"
INPUT LEVEL "NORMAL" or "HIGH"
(For music port
Note:
source)
Select "NORMAL" if the sound is
distorted during "HIGH" input level.
SUPERWOOFER "SW1", "SW2", "SW3" or "OFF"
RE-MASTER "ON RE-MASTER" or
"OFF RE-MASTER"
D.BASS
Press [D.BASS] to select "ON D.BASS",
"AUTO D.BASS" or "OFF D.BASS".
PRESET EQ
Press [PRESET EQ] to select "HEAVY", "SOFT",
"CLEAR", "VOCAL" or "FLAT".
Using the main unit
You can adjust certain sound effect using the controls on
the main unit.
1
Press the button to select the sound effect.
[PRESET EQ]: PRESET EQ
[MANUAL EQ]: BASS, MID, TREBLE
[D.BASS]: D.BASS
[SUPER WOOFER]: SUPERWOOFER
2
Turn [CONTROL] to select the desired setting.
12
DJ effects
By main unit only
You can use the DJ effect function to adjust the sound
quality.
1
Press [DJ].
[1] to [6] light up in blue.
2
Press [1] to [6] to select the desired DJ effect.
[1] PHASER
Add space and dimension to the sound.
[2] FILTER
Enhance or filter specific ranges of the sound.
[3] SOUND CHOPPER
Cut off the sound periodically.
[4] ELECTRO ECHO
Add digital echo to the sound.
[5] PITCH SHIFTER
Adjust the keys of the sound.
[6] HARMONIZER
Add notes to the sound to create harmony.
The selected button lights up in red.
To cancel, press the button again.
3
Turn [CONTROL] to select the desired setting.
To cancel the DJ effect
Press [DJ].
[1] to [6] light up in red.
Illumination effects
By main unit only
You can change the illumination pattern or color on this
system.
1
Press [ILLUMINATION] to select "PATTERN" or
"COLOR".
PATTERN Illuminate with pattern in multiple
colors.
COLOR Illuminate in one color.
2
Within 5 seconds, turn [CONTROL] to select the
desired setting.

Using a microphone

Preparation
Decrease the volume of the system to its minimum before
you connect or disconnect a microphone.
1
Connect a microphone (not supplied) to the
microphone jack.
Plug type: Ø 3.5 mm (⅛") monaural
2
Turn [MIC VOL, MIN/MAX] on the main unit to
adjust the volume of the microphone.
If you want to sing with the background music.
3
Play the music source and adjust the volume of
the system.
Note:
• If a strange noise (howling) is emitted, move the
microphone away from the speakers, or decrease the
volume of the microphone.
• When you do not use the microphone, disconnect it
from the microphone jack, and decrease the volume of
the microphone level to "MIN".