Carrier AquaEdge 19XRV Installation Instructions Manual page 42

SOLEPLATE DIMENSIONS
HEAT EXCHANGER FRAME SIZE
1 THROUGH 6
1.5 in.
10 in.
(38.1 mm)
(254 mm)
21.25 in. 18.25 in.
(539.8 mm) (463.6 mm)
1.5 in. 7 in.
(38.1 mm) (177.8 mm)
LEGEND
HRS — Hot Rolled Steel
NOTES:
1. Dimensions in ( ) are in millimeters.
2. Accessory (Carrier supplied, field installed) soleplate package includes 4 soleplates, 16 jacking screws and leveling pads.
3. Jacking screws to be removed after grout has set.
4. Thickness of grout will vary, depending on the amount necessary to level chiller. Use only pre-mixed non-shrinking grout, Ceilcote 748
or Chemrex Embeco 636 Plus Grout, 1½ in. (38.1 mm) to 2¼ in. (57.2 mm) thick.
NOTE: The accessory spring isolators are supplied by Carrier for installation in the field.
Fig. 25 — 19XRV Accessory Spring Isolation (Shown with Accessory Soleplates)
7/8-9UNC-4 HOLES FOR
JACKING SCREWS
(711.2 mm)
a19-2003
ACCESSORY SOLEPLATE DETAIL
VIEW X-X
Fig. 24 — Accessory Isolation
42
SOLEPLATE DIMENSIONS
HEAT EXCHANGER FRAME SIZE
7 AND 8
1.5 in.
17 in.
(38.1 mm)
(431.8 mm)
28 in. 25 in.
(635 mm)
1.5 in. 14 in.
(38.1 mm) (355.6 mm)
a19-1110tf
7/8-9UNC-2B HOLES FOR
JACKING SCREWS
a19-2002
a19-1521tf