Honeywell RDWL313A2000 Installation And Operation Manual page 5

Accessories
You can connect up to 4 accessories to your doorbell, including other push
buttons, window or door opening sensors, and motion
sensors.
If you try to connect more accessories than the max
number, the LED on the side blinks red.
Connect a Motion Sensor
1. Press and hold the Setting button on the doorbell for three seconds.
The LED on the side turns on with
an amber color.
2. Within 20 seconds of pressing the
Setting button, wave or make some
other kind of motion in front of the
motion sensor.
Connect a Push Button
Follow these steps to change the ring and light setting for an existing doorbell,
too.
1. Press and hold the Setting button
on the doorbell for three seconds.
The LED on the side turns on with an
amber color.
2. Press the push button.
3. Within 12 seconds of pressing the
push button, press the Music button
to select the ring for that push
button.
4. Within 12 seconds of pressing the
doorbell, press the Sunlight button
to select a light setting for that push
button.
5