Table of Contents
Advertisement
MAINTENANCE
WARNING: ALWAYS SWITCH THE CHAINSAW OFF, DISCONNECT FROM
THE POWER SUPPLY AND LET THE CHAINSAW COOL DOWN BEFORE
PERFORMING INSPECTION, MAINTENANCE AND CLEANING WORK!
• Keep the chainsaw clean. Remove debris from it after each use and
before storage.
• Regular and proper cleaning will help ensure safe use and prolong the
life of the chainsaw.
• Inspect the chainsaw before each use for worn and damaged parts. Do
not operate it if you find broken and worn parts.
WARNING: ONLY PERFORM REPAIRS AND MAINTENANCE WORK
ACCORDING TO THESE INSTRUCTIONS! ALL FURTHER WORK MUST BE
PERFORMED BY A QUALIFIED SPECIALIST.
CLEANING
1. Clean the chainsaw with a dry cloth. Use a brush for areas that are hard to
reach.
2. In particular clean the air vents after every use with a cloth and brush.
3. Remove stubborn dirt with compressed air.
NOTE: Do not use chemical, alkaline, abrasive or other aggressive
detergents or disinfectants to clean this chainsaw as they might
be harmful to its surfaces.
4. Check for worn or damaged parts. Replace worn parts as necessary or
contact an authorised service centre for repair before using the chainsaw
again.
5. Before and after each use, check the chainsaw and accessories (or
attachments) for wear and damage. Check for worn or damaged parts.
Replace worn parts as necessary before using the chainsaw again.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
22
Advertisement
Table of Contents
