Table of Contents
Advertisement
5. While the motor is running, activate the chain brake by moving your left
hand forward against the chain brake. The saw chain and motor should
stop immediately.
NOTE: The motor will not start if the chain brake is in the engaged
position.
WARNING: IF THE SAW CHAIN AND MOTOR FAIL TO STOP WHEN THE
CHAIN BRAKE IS ENGAGED, TAKE THE CHAINSAW TO THE NEAREST
AUTHORISED DEALER OR SERVICE CENTRE! DO NOT USE THE CHAINSAW IF
THE CHAIN BRAKE IS NOT WORKING PROPERLY!
THE CHAIN BRAKE SHOULD NOT BE USED FOR STARTING AND STOPPING
THE CHAINSAW DURING NORMAL OPERATION!
SWITCHING ON/OFF
1. Make sure that the oil tank has been filled with oil.
2. Make sure the chain brake is in the released position.
3. Hold the chainsaw with left hand on front handle and right hand on rear
handle.
• Use a firm and proper grip when holding the handle, your finger and
thumbs should encircle the handles
• Keep your body to the left of the blade at all times.
WARNING: DO NOT USE THE CHAIN BRAKE LEVER AS A HANDLE.
WARNING: NEVER USE A LEFT HANDED (CROSS-HANDED) GRIP OR ANY
GRIP THAT PLACES YOUR BODY OR ARM ACROSS THE CUTTING LINE.
4. Start the chainsaw by pushing the
trigger lock button with your
thumb and squeezing the trigger
switch.
NOTE: Check the blade tension
after every 15 minutes of use.
5. Release the trigger to switch the
chainsaw off.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
16
Advertisement
Table of Contents
