Table of Contents
Advertisement
ASSEMBLY
WARNING: FOR YOUR SAFETY AND THE SAFETY OF OTHERS MAKE SURE
THAT YOU HAVE READ AND UNDERSTOOD ALL THE SAFETY WARNINGS
BEFORE CONTINUING WITH THIS SECTION.
WARNING: ENSURE THAT THE CHAINSAW IS DISCONNECTED FROM THE
MAINS SUPPLY DURING ALL CHECKS AND ADJUSTMENTS IN THIS SECTION
FILLING THE CHAINSAW WITH OIL
Chainsaw oil must be added to the chainsaw as follows before use.
1. Place the chainsaw on a stable,
level surface.
2. Unscrew and remove the oil filler
cap.
3. Using a funnel, fill the oil tank with
chainsaw oil (supplied).
• The oil tank will hold 135cc of
chain oil, enough to lubricate
the chain for 12-15 minutes of
sawing.
• Chainsaw oil is available from your CLARKE dealer (part number
3050865)
CAUTION: YOU MUST ONLY USE CHAINSAW OIL WITH THIS CHAINSAW.
USING DIFFERENT OIL MAY CAUSE DAMAGE AND INVALIDATE YOUR
WARRANTY.
4. Refit the oil filler cap.
5. Wipe up any spillage before continuing.
6. The oil level should be checked frequently during use and topped up as
necessary (when the level drops to the min line on the oil level window).
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
10
Advertisement
Table of Contents
