Table of Contents
Advertisement
1
IMPORTANT SAFETY INSTRUCTIONS FOR INSTALLER AND OPERATOR
A.
SAVE THESE INSTRUCTIONS.
B.
DO NOT EXPOSE CHARGER TO RAIN OR SNOW.
C.
ONLY TRAINED AND QUALIFIED PERSONNEL MAY INSTALL AND SERVICE THIS UNIT.
D.
GROUNDING INSTRUCTIONS - This battery charger must be connected to a grounded metal permanent
wiring system or an equipment-grounding conductor run with circuit conductors and connected to
equipment-grounding terminal on battery charger. Connections to the battery charger must comply with all
local codes and ordinances.
E.
Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; shut off
power at the branch circuit protectors, disconnect from battery power sources and have the unit serviced or replaced
by qualified personnel.
F.
To reduce risk of electric shock, disconnect the branch circuit feeding the charger and disconnect the battery before
attempting any maintenance or cleaning. Turning off controls will not reduce this risk.
G.
Use this charger for charging FLOODED LEAD-ACID, VRLA or NICKEL-CADMIUM batteries only. Do
not use this battery charger for charging dry cells, alkaline, lithium, nickel-metal-hydride, or sealed nickel-
cadmium batteries that are commonly used with home appliances. These batteries may burst and cause injuries to
persons and damage to property.
H.
NEVER charge a frozen battery .
I.
To reduce the risk of battery explosion, follow these instructions and those published by the battery manufacturer
and the manufacturer of any equipment you intend to use in the vicinity of a battery. Review cautionary markings
on these products.
J.
Use of an attachment not recommended or sold by SENS may result in a risk of fire, electric shock, or injury to
persons .
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
K.
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
L.
Notice to users in the European Union: Declaration of Conformity limits the use of chargers to non-public power
grids.
Service Hotline: 1.800.742.2326
1.303.678.7500
WARNING:
HEATSINKS AND OTHER METALLIC SURFACES WITHIN THE CHARGER
MAY BE ENERGIZED AT HIGH VOLTAGE POTENTIALS, WHICH CAN BE
LETHAL. DO NOT TOUCH EXPOSED METAL SURFACES WITHIN THE
CHARGER WHILE EITHER INPUT POWER OR BATTERY IS APPLIED.
WARNING:
WORKING IN THE VICINITY OF A LEAD-ACID OR NICKEL-CADMIUM
BATTERY IS DANGEROUS. STORAGE BATTERIES GENERATE EXPLOSIVE
GASES DURING NORMAL BATTERY OPERATION. IT IS OF UTMOST
IMPORTANCE THAT BEFORE USING YOUR CHARGER, YOU READ THIS
MANUAL AND FOLLOW THE INSTRUCTIONS.
SENS IQ Technical Manual
4
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
