Installing Processor - AOpen MX46LS-V Easy Installation Manual

3. Installing Processor

This socket supports Micro-FC-PGA2 package CPU, which is the latest CPU package
developed by Intel. Other forms of CPU package are impossible to be fitted in.
CPU socket lever
4. Installing CPU & System Fans
Plug in the CPU fan cable to the 3-pin CPUFAN1 connector. If you have chassis fan, you
can also plug it in SYSFAN2 or SYSFAN3 connector.
SYSFAN2 Connector
1.
Pull up the CPU socket lever and up to
90-degree angle.
2.
Locate Pin 1 in the socket and look for
a (golden) cut edge on the CPU upper
interface. Match Pin 1 and cut edge.
Then insert the CPU into the socket.
3.
Press down the CPU socket lever and
finish CPU installation.
Note: If you do not match the CPU
socket Pin 1 and CPU cut edge well,
you may damage the CPU.
GND
+12V
NC
SYSFAN3 Connector
CPUFAN1 Connector
Note: Some CPU fans
do not have sensor pin
so they cannot support
fan monitoring.
GND
+12V
SENSOR
5. Setting CPU Voltage & Frequency
Setting CPU Core Voltage
This motherboard supports CPU VID function. The CPU core voltage will be automatically
detected.
Setting CPU Frequency
This motherboard is CPU jumper-less design, you can set CPU frequency through the
BIOS setup, and no jumpers or switches are needed. The default setting is "table select
mode". You can adjust the FSB from "CPU Host/SDRAM/PCI Clock" for overclocking.
BIOS Setup > Frequency / Voltage Control > CPU Speed Setup
CPU Ratio 8x, 10x... 21x, 22x, 23x, 24x
CPU FSB 100 MHz.
CPU Core FSB
Northwood CPU
Frequency Clock
Pentium 4 1.6G 1600MHz 100MHz
Pentium 4 1.6G 1600MHz 133MHz
Pentium 4 1.7G 1700MHz 133MHz
Pentium 4 1.8G 1800MHz 100MHz
Pentium 4 2.0G 2000MHz 100MHz
Pentium 4 2.2G 2200MHz 100MHz
Pentium 4 2.26G 2260MHz 133MHz
Pentium 4 2.4G 2400MHz 100MHz
Pentium 4 2.4G 2400MHz 133MHz
Pentium 4 2.53G 2530MHz 133MHz
Pentium 4 2.66G 2660MHz 133MHz
Pentium 4 2.8G 2800MHz 133MHz
Willamette CPU Core
FSB Clock
CPU Frequency
Pentium 4 1.5G 1500MHz 100MHz
Pentium 4 1.6G 1600MHz 100MHz
Pentium 4 1.7G 1700MHz 100MHz
Pentium 4 1.8G 1800MHz 100MHz
Pentium 4 1.9G 1900MHz 100MHz
Pentium 4 2.0G 2000MHz 100MHz
Celeron CPU Core
FSB Clock
CPU Frequency
Celeron 1.7G 1700MHz 100MHz
Celeron 1.8G 1800MHz 100MHz
Warning: SIS 650GX /
651 support maximum
400MHz system bus
and 66MHz AGP clock;
System
Ratio
higher clock
Bus
may cause
400MHz 16x
system damage.
533MHz 12x
533MHz 13x
400MHz 18x
400MHz 20x
Note: Since the latest
400MHz 22x
processor, Northwood,
533MHz 17x
400MHz 24x
would detect the clock
533MHz 18x
ratio automatically,
533MHz 19x
may not be able to adjust
533MHz 20x
the clock ratio in BIOS
533MHz 21x
manually.
System
Ratio
Bus
400MHz 15x
400MHz 16x
400MHz 17x
400MHz 18x
400MHz 19x
400M
20x
Hz
System
Ratio
Bus
400MHz 17x
400MHz 18x
setting
serious
you