Clock - Chevrolet SS Sedan 2017 Owner's Manual

INT : Move the windshield wiper
x
lever to INT. Turn the
on the wiper lever to adjust the
sensitivity.
. Turn the band up for more
sensitivity to moisture.
. Turn the band down for less
sensitivity to moisture.
.
Move the windshield wiper lever
out of the INT position to
deactivate Rainsense.
Wiper Arm Assembly Protection
When using an automatic car wash,
move the windshield wiper lever to
OFF. This disables the automatic
Rainsense windshield wipers.
With Rainsense, if the transmission
is in N (Neutral) and the vehicle
speed is very slow, the wipers will
automatically stop at the base of the
windshield.
The wiper operations return to
normal when the transmission is no
INT band
longer in N (Neutral) or the vehicle
speed has increased.
n L
: Pull the windshield wiper
lever toward you to spray windshield
washer fluid and activate the wipers.
The wipers will continue until the
lever is released or the maximum
wash time is reached. When the
windshield wiper lever is released,
additional wipes may occur
depending on how long the
windshield washer had been
activated. See Washer Fluid 0 286
for information on filling the
windshield washer fluid reservoir.
In freezing weather, do not use
the washer until the windshield is
warmed. Otherwise the washer
fluid can form ice on the
windshield, blocking your vision.
{
Warning
Instruments and Controls

Clock

Time and Date
1. Press HOME on the radio
faceplate.
2. Touch Config on the
Home Page.
3. Select Time and Date.
4. Select the desired setting to
change.
Set Time : Touch + or
or decrease the hours and minutes.
If auto timing is set, the time
displayed on the clock may not
update immediately when driving
into a new time zone.
Set Date : Touch + or
or decrease the year, month,
and day.
12hr/24hr Format : Touch to select
12 hour or 24 hour time format.
Press Back to save.
93
to increase
to increase