Chevrolet SS Sedan 2017 Owner's Manual page 198

Identification Number (PIN), it
will display. The PIN is used in
Step 5.
4. Start the pairing process on the
cell phone to be paired to the
vehicle. See the cell phone
manufacturer's user guide.
5. Locate and select the device
named after the vehicle make
and model in the list on the cell
phone. Follow the instructions
on the cell phone to enter the
PIN provided in Step 3, or to
confirm the six-digit code
matches. The system
recognizes the new connected
phone after the pairing process
is complete.
6. If the phone prompts to accept
connection or allow phone
book download, select always
accept and allow. The phone
book may not be available if
not accepted. Some phones
will put connection request or
phonebook request in a pull
down task bar at the top of the
display. Drag down the task bar
and look for connection/
phonebook request and accept.
7. Repeat to pair additional
phones.
Listing All Paired and Connected
Phones/Devices
1. Press CONFIG on the center
stack.
2. Select Phone Settings.
3. Select Device List.
Deleting a Paired Phone/Device
1. Press CONFIG on the center
stack.
2. Select Phone Settings.
3. Select Device List.
4. Select the phone to delete and
follow the display prompts.
Connecting to a Different Phone
To connect to a different phone, the
new phone must be in the vehicle
and available to be connected to the
Bluetooth system before the
process is started.
Infotainment System
1. Press CONFIG on the center
stack.
2. Select Phone Settings.
3. Select Device List.
4. Select the new phone to
connect to and follow the
display prompts.
Pairing with Voice Recognition
A Bluetooth-enabled cell phone
must be paired and then connected
to the vehicle before it can be used.
See the cell phone manufacturer's
user guide for Bluetooth functions
before pairing the cell phone. If a
Bluetooth phone is not connected,
calls will be made using OnStar
Hands-Free Calling, if available.
See OnStar Overview 0 378.
Pairing a Phone
b
g
1. Press / . The system
responds "Please say a
command," followed by a tone.
2. Say "Pair." The system
responds with "Please search
for Bluetooth devices on your
197