Chevrolet SS Sedan 2017 Owner's Manual page 160

on the radio. User predefined cover
art will always be used first. If no
cover art is found Gracenote will
use generic genre graphics or
images of artists.
More Like This
The Gracenote database contains
attributes for Music, such as genre,
era of music, region, artist type,
mood, etc. Use this to create a
playlist of up to 30 songs "more like"
currently listened to song. This
playlist will be stored in the Playlist
menu when the device is
reconnected. If songs are removed
from the device, the system will
simply skip over those songs and
play the next available song.
Use the infotainment display or
voice recognition to create a More
Like This Playlist. See "Voice
Recognition Commands" in Voice
Recognition 0 189.
Gracenote Indexing
While Gracenote is indexing,
infotainment features are available
including selecting music from the
menu. Voice recognition music will
not be available until the radio has
completed indexing the device.
Devices with more music may take
longer to index. The device will
index when plugged into the radio
for the first time. When Indexing is
removed from the display, the radio
is ready to support music search.
On the next connection or ignition
cycle, Indexing will show briefly on
the display. The radio is searching
for changes to the device and
preparing the music list. If there are
no changes, the voice recognition
music search will be available. The
radio will index and store two
devices with up to 10,000 songs on
each device.
USB MP3 Player and USB Drives
.
The USB MP3 players and USB
drives connected must comply
with the USB Mass Storage
Class specification (USB MSC).
. Hard disk drives are not
supported.
. The radio will not be able to play
back write-protected music.
Infotainment System
. File systems supported: FAT32,
NTFS, Linux, and HFS+.
.
The following restrictions apply
for the data stored on a USB
MP3 player or USB device:
Maximum folder structure
depth: eight levels.
Maximum number of MP3/
WMA files that can be
displayed: 10,000.
Playlist entries must be in the
form of relative paths.
The system attribute for
folders/files that contain audio
data must not be set.
To play a USB device, do one of the
following:
. Connect the USB and it begins
to play.
. Touch the Now Playing icon on
the Home Page.
. Press SRCE on the center stack
to scroll until the USB source
display is available.
159