Chevrolet SS Sedan 2017 Owner's Manual page 329

328 Vehicle Care
If the vehicle has an accessory
power outlet, do not use the
cigarette lighter.
If the vehicle only has a
cigarette lighter, use the
cigarette lighter.
Do not pinch the power plug
cord in the door or window.
8. Start the vehicle. The vehicle
must be running while using
the air compressor.
9. Switch the on/off switch (1) to
the I position.
The compressor will inflate the
tire with air only.
10. Inflate the tire to the
recommended inflation
pressure using the pressure
gauge (2). The recommended
inflation pressure can be found
on the Tire and Loading
Information label. See Tire
Pressure 0 309.
The pressure gauge (2) may
read higher than the actual tire
pressure while the compressor
is on. Turn the compressor off
to get an accurate reading. The
compressor may be turned on/
off until the correct pressure is
reached.
11. Switch the on/off switch (1) to
the O position.
Be careful while handling the
tire sealant and compressor kit
as it could be warm after
usage.
12. Unplug the power plug (6) and
the air only hose (4).
13. Replace the tire valve
stem cap.
14. Place the equipment in the
original storage location in the
vehicle.
Removal and Installation of the
Sealant Canister
After repairing a tire, replace the tire
sealant canister.
To remove the sealant canister:
1. Unlock the air only hose (4)
from the tire sealant
canister (3) by pulling up on the
lever.
2. Pull the air only hose (4) from
the tire sealant canister (3).
3. Unwrap the sealant/air hose (5)
from the air compressor.
4. Turn the sealant canister (3)
counterclockwise so the
sealant/air hose (5) is aligned
with the slot in the compressor.
5. Lift the tire sealant canister (3)
from the compressor and
replace with a new tire sealant
canister. See your dealer for
more information.