Chevrolet SS Sedan 2017 Owner's Manual page 197

Table of Contents

Advertisement

196
Infotainment System
5
>
/
: Press to enter the Phone
main menu. Press and hold to mute
or unmute.
Voice Recognition
The voice recognition system uses
commands to control the system
and dial phone numbers.
When using voice recognition:
.
The system may not recognize
voice commands if there is too
much background noise.
.
A tone sounds to indicate that
the system is ready for a voice
command. Wait for the tone and
then speak.
.
Speak clearly in a calm and
natural voice.
See Voice Recognition 0 189.
Audio System
Sound comes through the vehicle's
front audio system speakers and
overrides the audio system. Use the
O
VOL/
knob during a call to change
the volume level. The adjusted
volume level remains in memory for
later calls. The system maintains a
minimum volume level.
See Voice Recognition 0 189.
Bluetooth Audio
See Bluetooth Audio 0 163.
Pairing with Infotainment
Controls
A Bluetooth-enabled cell phone
must be paired and then connected
to the vehicle before it can be used.
See your cell phone manufacturer's
user guide for Bluetooth functions
before pairing the cell phone. If a
Bluetooth phone is not connected,
calls will be made using OnStar
Hands-Free Calling, if available.
See OnStar Overview 0 378.
Pairing Information
.
A Bluetooth-enabled phone and
an audio playback device can be
paired to the system at the
same time.
.
Up to five devices can be paired
to the Bluetooth system.
.
The pairing process is disabled
when the vehicle is moving.
.
Pairing only needs to be
completed once, unless the
pairing information on the cell
phone changes or the cell phone
is deleted from the system.
.
Only one paired cell phone can
be connected to the Bluetooth
system at a time.
.
If multiple paired cell phones are
within range of the system, the
radio will connect to the first
phone in the list or to the phone
that was previously connected.
Pairing a Phone/Device
1. Press CONFIG on the center
5
>
stack or press
/
steering wheel controls.
2. Select Phone Settings.
3. Select Pair Device (Phone).
The radio displays "Please
start Bluetooth search on your
phone. Confirm or enter
number:." If the device
supports a four-digit Personal
on the

Advertisement

Table of Contents
loading

Table of Contents