Sony FDR-AX30 How To Use Manual page 99

[85] How to Use
product
Connecting this product to more than one camera with
Multi Camera Control (Multi Connection)
You can connect this product with other cameras via Wi-Fi. By connecting via Wi-Fi, you can
control other cameras with this product.
1. Turn on the power of the cameras you want to connect and set them in a state ready for
Wi-Fi connection.
For details on the operation, refer to the instructions manual of the cameras.
2. Turn on this product, then select
Set] - [Multi Connection].
3. Select
4. Select .
5. Select [Connect Device Reg].
This product enters registration waiting status (registration waiting status ends in
about 2 minutes).
6. Perform connecting operation on the camera you want to connect with this product.
For details on the Wi-Fi connection, refer to the instruction manuals of the cameras.
7. Select [OK] when it is displayed on the screen of the product to finish the registration.
8. Repeat steps 4 to 7 for each camera you want to connect.
Note
A maximum of five cameras (compatible with Multi Camera Control) can be registered to
this product.
The operations in step 4 - 8 are necessary only for the first-time registration.
Change the settings of the camera you want to connect to before the registration waiting
status of this product ends.
This product displays a character string deleting "DIRECT-" from the SSID of the camera
you want to connect to as the SSID of the camera.
Using the Wi-Fi function
- [Wireless] - [ Function] - [Multi Camera Control].
Controlling other cameras through this
- [Wireless] - [ Setting] - [Multi Camera Ctrl