Charging The Battery Pack Using The Ac - Sony FDR-AX30 How To Use Manual

Note
You cannot use any InfoLITHIUM battery pack other than the V series to this product.
You cannot use the NP-FV30 InfoLITHIUM battery pack with this product.
In the default setting, the power turns off automatically if you leave this product without
any operation for about 2 minutes, to save battery power (Power Save).
[10] How to Use
Charging the battery pack using the AC Adaptor
Charge the battery pack using the supplied AC Adaptor. Attach the battery pack in advance.
1. Close the LCD monitor.
When the viewfinder (models with the Viewfinder) is pulled out, retract it.
2. Connect the AC Adaptor and the power cord (mains lead) to this product and a wall
outlet (wall socket).
The POWER/CHG (charge) lamp lights orange.
The POWER/CHG (charge) lamp turns off when the battery pack is fully charged.
Disconnect the AC Adaptor from the DC IN jack of this product.
A: AC Adaptor
B: Power cord (mains lead)
C: DC IN jack
Getting started Power source preparations