Turning The Power - Sony FDR-AX30 How To Use Manual

The POWER/CHG (charge) lamp turns off when the battery pack is fully charged.
Disconnect the Built-in USB Cable from the computer, and then store it in the pocket
on the grip belt.
If the Built-in USB Cable is not long enough for the connection, use the USB
connection support cable.
: Built-in USB Cable
: To a wall outlet (wall socket)
To put the Built-in USB Cable away
Put the Built-in USB Cable back in the pocket on the grip belt after use.
Hint
It is recommended that you charge the battery in a temperature range of 10 °C to 30 °C
(50 °F to 86 °F).
[12] How to Use
Turning the power on
Turn on this product.
1. Open the LCD monitor of this product and turn the power on.
You can also turn on this product by pressing
out the viewfinder (models with the viewfinder).
Getting started Power source preparations
(ON/STANDBY) button or by pulling