Operation; Settings - Martin Acrobat User Manual

MC-1

OPERATION

All new Acrobats and older Acrobats with CPU firmware v 1.4 or higher are fully
compatible with the Martin MC-1 Controller. See the MC-1 user manual for
additional information.
M C - 1 S E T T I N G S
DIP-switch pin 10 must be set to OFF to enable MC-1 mode operation. Changes
to the setting take effect after the fixture has been turned off and on.
DIP-switch pins 6, 7, 8, and 9 select several control options that can be combined
to achieve powerful effects quickly and easily.
Pin 12 selects lamp power and works in all modes. Set it to ON for reduced lamp
voltage and longer lamp life; set it to OFF for full intensity.
Inverted parabolic reflector
Use a different color/gobo.
Rotate the mirror drum in
the opposite direction (to
that requested by the MC-
1)
Swivel the mirror drum in
the opposite direction (to
that requested by the MC-
1)
14
Option
1
Swivel
MC-1 operation
Setting (0 = OFF, 1 = ON)
2 3 4 5
Rotate
6 7 8 9
1
1
1
1
Acrobat user manual
7
10 11
0
0
0
0