Indicator
Name
Adaptive Cruise
Control (ACC)
with Low Speed
Follow (LSF)
Indicator
(Amber)
*
* Not available on all models
On/Blinking
Comes on for a few seconds when
●
you set the power mode to ON,
then goes off.
Comes on if there is a problem
●
with ACC with LSF.
Comes on if anything covers the
●
radar sensor cover and prevents
the sensor from detecting a
vehicle in front.
May come on when driving in bad
●
weather (rain, snow, fog, etc.)
ACC with LSF has been
●
automatically canceled.
Comes on if there is a problem
●
with ACC with LSF.
Indicator may come on
●
temporarily when Maximum Load
Limit is exceeded.
ACC with LSF has been
●
automatically canceled.
Explanation
Comes on while driving - Have your
●
vehicle checked by a dealer.
When the radar sensor gets dirty, stop
●
your vehicle in a safe place, and wipe off
dirt using a soft cloth.
Have your vehicle checked by a dealer if
●
the indicator does not go off even after
you clean the sensor cover.
Make sure the total load is within the
●
Maximum Load Limit.
2 Maximum Load Limit P. 437
Stays on constantly - Have your vehicle
●
checked by a dealer.
uuIndicatorsu
Message
*
—
Continued
97