Honda CR-V 2017 Owner's Manual page 195

■
Storing a Position in Memory
Memory
Button 1
Memory
Button 2
SET Button
■
Recalling the Stored Position
Memory
Button 1
Memory
Button 2
uuOperating the Switches Around the Steering WheeluDriving Position Memory System
1. Set the power mode to ON. Adjust the
driver's seat to the desired position.
2. Press the SET button.
u You will hear a beep, and the memory
button indicator light will blink.
3. Press and hold memory button
within five seconds of pressing the SET
button.
u Once the seat position has been
memorized, the indicator light on the
button you pressed stays on.
1. Move the shift lever to ( P .
2. Apply the parking brake.
3. Press a memory button ( 1 or
(
u You will hear a beep, and the indicator
light will blink.
The seat will automatically move to the
memorized position. When it has finished
moving, you will hear a beeper, and the
indicator light stays on.
1Storing a Position in Memory
After you press the SET button, the storing operation
will be canceled when:
•
You do not press the memory button within five
seconds.
•
You readjust the seat position before the double-
beep.
•
You set the power mode to any position except
1 or
( ( 2
ON.
1Recalling the Stored Position
The seat will stop moving if you:
•
Press the SET button, or a memory button (
).
( 2
2 ).
( •
Adjust the seat position.
•
Shift into any position except
*
or
( 1
.
( P
193