Inspecting And Changing Fuses - Honda CR-V 2017 Owner's Manual

uuFusesuInspecting and Changing Fuses

Inspecting and Changing Fuses

Blown Fuse
Combined
Fuse
Fuse Puller
*1: Models with the smart entry system have an ENGINE START/STOP button
instead of an ignition switch.
630
1. Turn the ignition switch to LOCK
headlights and all accessories off.
2. Remove the fuse box cover.
3. Check the large fuse in the engine
compartment.
If the fuse is blown, use a Phillips-head
u
screwdriver to remove the screw and
replace it with a new one.
4. Inspect the small fuses in the engine
compartment and the vehicle interior.
u If there is a blown fuse, remove it with
the fuse puller, and replace it with a new
one.
( 0 *1 . Turn
1Inspecting and Changing Fuses
NOTICE
Replacing a fuse with one that has a higher rating
greatly increases the chances of damaging the
electrical system.
Replace fuse with a spare fuse of the same specified
amperage.
Confirm the specified amperage using the charts on
P. 627 to 629.
Use the charts to locate the fuse in question and
conform the specific amperage on the fuse label.
2 Fuse Locations P. 627
There is a fuse puller on the back of the engine
compartment fuse box cover.