Charging The Battery - Honda CR-V 2017 Owner's Manual

Charging the Battery

Disconnect both battery cables to prevent damaging your vehicle's electrical system.
Always disconnect the negative (–) cable first, and reconnect it last.
*1: Models with the smart entry system have an ENGINE START/STOP button instead of an
ignition switch.
* Not available on all models
uuBatteryuCharging the Battery
1Battery
When you find corrosion, clean the battery terminals
by applying a baking powder and water solution.
Clean the terminals with a damp towel. Cloth/towel
dry the battery. Coat the terminals with grease to
help prevent future corrosion.
When replacing the battery, the replacement must be
of the same specifications.
Consult a dealer for more information.
The indicators for the Adaptive Cruise Control (ACC)
with Low Speed Follow (LSF) * , Road Departure
Mitigation (RDM) System * , Electric Power Steering
(EPS) system, Vehicle Stability Assist (VSA®) system,
VSA® OFF, Collision Mitigation Braking System
(CMBS TM ) * , and low tire pressure/Tire Pressure
Monitoring System (TPMS) * may come on when you
turn the ignition switch to ON
w (
connecting the battery.
Drive a short distance at 12 mph (20 km/h). The
indicator should go off. If it does not, have your
vehicle checked by a dealer.
TM
*1 after re-
591